When it gets cold every year. Many people go to turn on their gas furnace. Only to find that it doesn’t work right. Then. In a panic. They rush to find a certified HVAC technician who can fix the furnace before the winter weather gets too cold. And work with regional companies of furnace installation in Toronto. This might the most challenging situation you’ve ever encountered. Proper furnace maintenance can help you avoid problems or at least make them less likely.
some suggestions.
1. Call Ahead
If you want a professional to do the job. The most important thing to remember is to call early. The best time to call is in late September or early October. Then. Not only will it easier to find a HVAC technician. But you may even able to set up an appointment so that someone is there when the technician comes.
- Get in Touch with Your Power Company
You might also want to make an appointment for a routine inspection with the company that provides your natural gas at the same time you call the HVAC technician. This way. You won’t have to find someone else to there on your own.
When you make an appointment with the utility company. You want them to check the connections and pipes from the gas source to the meter and from the meter to the heating source. The technician will able to tell if there are any problems that need to fixed by the utility company.
Find Out How Thorough the Inspection Will Be.
When you make an appointment with the HVAC technician (if you’re not going to do it yourself). Ask what the inspection will cover. Depending on what you want him to do for you. You may need to ask him to:
Check that everything is working right so that carbon monoxide doesn’t get out. Also. Now is a good time to ask about buying or having carbon monoxide detectors put in. If you turn off the pilot lights during the summer. You should turn them back on. Make sure there is nothing near the furnace that could start a fire. Have a professional clean the vents and ducts.
4. If You Do It Yourself. Careful As Above
If you decide to do your own furnace maintenance. You will need to check the same things as in step 3 and do the same things.
About Checkups Once a Year
If you think you know how to take care of your furnace well enough to do it every year. There are some things you can do every year. Both before it gets cold and while it is cold. And work with regional companies of furnace installation in Toronto. This might the most challenging situation you’ve ever encountered.
Every Three Months or So. At Least
Every three months or so. At least. You should change the filters. If there’s a lot of dust on them between changes. You might want to do this once a month. When you do your first maintenance check before it gets cold. You should buy new furnace filters. Even if the ones you already have are easy to clean by brushing. Shaking. Beating. Washing with a garden hose. Or other methods. You can keep the filters in good shape between changes by using the ways you normally clean.
When You’re Ready to Put in The New Filters
When you’re ready to put in the new filters. Take a few minutes to clean around the hole where the filter goes and clean the grate or cover that goes over the filter. This will make sure that the place where your filters are put in is as clean as possible. Once you’re done with your furnace maintenance. You should able to enjoy a warm house in the winter. But if you smell gas at any time while the furnace is running. You should act right away. Leave your home and call 9-1-1. Natural gas is very flammable and can explode when it gets hot.
How Oil Furnaces Work
During the cold months. Some people heat their homes with oil furnaces. These furnaces require different maintenance techniques than natural gas ones. Again. Though. You can follow these steps to learn how to maintain your furnace or hire a certified HVAC technician to do it for you. And work with regional companies of furnace installation in Toronto. This might the most challenging situation you’ve ever encountered.
Clean The Blower Once Before It Gets Cold.
- Clean the blower once before it gets cold. And then again in the middle of the cold weather season. Use a hand-held vacuum cleaner with a brush and hose extension attachment. Or use new paintbrushes of different sizes to clean around the fan blades and other parts.
Do not use anything that could cause static electricity. Also. If you want to extra safe while working on your oil furnace. You might want to turn off the power to it.
When you do your mid-season cleaning. Don’t forget to grease any parts that may need it. Use cup oil or a motor oil that is very light and doesn’t have any cleaning agents in it. Don’t use regular cooking oil. When you do maintenance on your furnace for the first time. You should change the filters. After that. You should do it as often as needed for the rest of the cold season. This includes the oil filter and any filters that let air in or out.
Your Furnace Has a Stack Control
- If your furnace has a stack control. Make sure to clean it before the heating season starts. Take it out of its case and use a rag dipped in warm water and mild soap to clean it carefully but thoroughly. Not simply people seeking for furnace installation in Toronto targeted by this information.
For more information on this topic. please visit Cambridge Heating and Cooling or you can contact on 416-750-4363
